Brand Name: Autel MaxiScan MS300
Software Update: Yes
Autel MaxiScan MS300 Feature:
Works with 1996 and newer cars & trucks that are OBD II compliant (including the CAN, VPW, PWM, ISO and KWP 2000 protocols)
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTC)
Includes definitions look-up software on CD with over 7000 DTC definitions
Displays DTC definitions on screen
Turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Reviews the emission readiness status of OBD monitors
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Determines the malfunction indicator lamp (MIL) status
Free CD software with over 7000 DTC definitions
Easy to use with one plug-in
Highly reliable and accurate
Easy-to-read crystal-clear backlit 2-line LCD display
Stand-alone unit with no need for an additional laptop computer to operate
Small in size and conveniently fits in your palm
Safely communicates with the on-board computer
No batteries needed--powered via detachable OBD II cable
Autel MaxiScan MS300 COMPATIBLE VEHICLES
This scanner is compatible with 1996 or newer cars and light trucks that are OBD II compliant.
The MaxiScan OBD II Scan Tool is specially designed to work with all OBD II compliant vehicles, including those equipped with the next-generation protocol-Control Area Network (CAN).
It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified.
Additionally, Government regulations mandate that all OBD II compliant vehicles must have a common sixteen-pin Data Link Connector (DLC). For your vehicle to be OBD II compliant, it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Autel MaxiScan MS300 Sepcification:
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: -32 to 122 F° ( 0 to 50°C )
Storage Temperature: -4 to 158 F° (-20 to 70°C )
Power: 10.0 to 15.5 Volts provided via vehicle battery
Dimensions:Length 4.4" (113 mm) Width 2.9" (74 mm) Height 0.83" (21mm)
NW: 0.45lb (0.25 Kg) GW: 0.50lb (0.27Kg)
Autel MaxiScan MS300 Package including:
1x Autel MaxiScan MS300 Tool
1x Instruction Manual
1x CD-ROM (definitions look-up software on CD-ROM)
Autel MaxiScan MS300 Pictures:
- Ask Question
Does this item read and display I/M monitor status?A:Yes, this item is able to check engine(p codes),reads,erases codes and check I/M monitors.Focalobd answered on June 27, 2017can it reset engine lightA:Yes. It will identify cause, then give option to clear warning which disengages light.Focalobd answered on June 16, 2017Will this work with a Subaru Forester 2001-2002?A:Will work for 2001-2002 Subaru unless the vehicle you are checking has a malfunctioning obd-II.Focalobd answered on May 26, 2017will it do 2002 Oldsmobile intrigueA:It should work quite well on almost any Gm vehicle, including your Intrique.Focalobd answered on June 12, 2018can it tell you if there is a problem, but the check engine light is not on?A:It will show you a fault code, you can check the code meaning in the manual book.Focalobd answered on June 7, 2017
Easy and fast to use
This little scan tool does everything we need it to do.
Write Your Own Review
You may also be interested in the following product(s)
Regular Price: $55.00
Special Price $39.99