First: high temperature protection of brake pads
Prevent the brake system corrosion, prevent the brake disc from high temperature surface card die, eliminate the brake piece of screaming, maintain good lubrication lasting, need to be resistant to high temperature up to 1400C above the ceramic component products. Therefore, to regularly using the OBD Diagnostic Tool check the thickness of the brake pads or brake shoe. In the normal driving situation, the front brake of the brake pad life is 50000 - 30000 kilometers, the service life of the brake pad is 150000 - 120000 km. Once the brake wear to the limit should be replaced in a timely manner.

Brake system maintenance Note

Second: brake wheel cylinder lubrication and maintenance
Lubrication of brake wheel cylinder shaft and cup, keep the wheel cylinder liner soft, extend the service life of the pump, need to use fully synthetic brake wheel cylinder lubricating oil.

Third: Clean brakes
Quick cleaning brakes, brake drums and any parts of grease, dirt and friction dust, keeping the brakes heat dissipation; eliminate harsh noise brakes, promote uniform brakes, use Launch X431 IV GX4 Master or Launch X431 Diagun III tool to check the brake system.

Fourth: brake oil change
Brake oil has water absorption characteristics, long time no replacement will corrode the brake system for traffic and security. It recommends that owners generally, to replace a brake fluid every 20,000 km. Mainly to ensure the cleanliness of the brake fluid.

Fifth: tire screw, brake disc and ring contact surface rust lubrication
To prevent corrosion and prevention screw and surface heating stuck, convenient disassembly, high temperature of above 1100c aluminum product ingredients, to guarantee and the brake contact area and improve the braking force, the need for regular use of Autel MaxiSys Mini MS905 or Autel MaxiDas DS708 tools to detect the brake system performance.