Whatever the ultimate brake system is by the brake pad or brake shoe to complete brake function. Therefore, to check the thickness of the brake pads or brake shoes regularly. When they find it close to or less than the thickness of the minimum thickness specified by the manufacturer, should be replaced immediately. Check the brakes at the same time, also check the brakes or brake drum wear, if use Auto Diagnostic Tool to check the contact surface dents, the need for timely disc or drum, to ensure the brake pads contact area improve braking force.
In addition also need to check the brake fluid level, if that brake fluid level is too low, should be appropriate to add brake fluid (must add the same brand of brake fluid, different brands of brake fluid in the brake after mixing pipe may corrode and affect brake effect), the height of the liquid should be maintained in brake oiler scale division line between the upper and lower bounds, and then use the Launch X431 Diagun III or Launch Creader VI tools to check the brake fluid working is normal.
Mainly from the maintenance of brake fluid brake fluid selection and replacement of two aspects, in the selection of brake fluid, depending on how the performance, the best buy brand name products, quality and security. If the brake fluid fouling, emissions from all brake fluid and flush the entire system, then use the new brake fluid filling cylinder.
Do not re-use brake oil, all be discharged from the system of the brake fluid should be discarded, if you continue to use the brake fluid in the case of deterioration, will be on the brake master cylinders, wheel cylinders, hydraulic control unit and other components It produced affecting the normal operation or even damage the brake and performance degradation or even brake failure. Cause accidents, affect the safety of personnel and passengers, so check the car's performance on a regular basis, Autel AutoLink AL609 and Autel MaxiDiag Elite MD802 is a professional tool for checking vehicles.