EFI engine is currently using a wide range of devices on the car, compared with the conventional carbureted fuel system, EFI engine fuel supply system, not only complex, but also parts with precision. When cleaning maintenance to must pay special attention to, when necessary also need to use Auto Diagnostic Tool to check the engine oil supply system.
During cleaning maintenance, some parts can not be disassembled and dismantled, some parts assembly requirements is high, which makes fuel injection system than carbureted gasoline vehicles are more vulnerable to gasoline in the glial, sediment hazards, resulting in clean work is very complicated.
Engine fuel supply system, into the exhaust system is clean, has a decisive influence on car driving performance and even. Due to the influence of driving environment and fuel quality, the injection nozzle, intake manifold into the exhaust valve and combustion chamber and other prone resin sediment, through the Launch X431 PAD or Launch X431 GDS tool inspection data show, affecting the normal fuel supply, caused by fuel injection quantity control are not allowed, atomization adverse, oil pressure regulator failure, resulting in engine idle speed instability, poor acceleration, knock, lack of fire, increased fuel consumption, exhaust emissions exceeding etc. fault phenomenon occurs.
In order to clean the oil supply system need to solve the problem from the inside, they usually avoid demolition clean way. Vehicle cleaning job by Xtool PS2 or Autoboss V30 SPX special equipment and cleaning agents, under certain pressure and flow control, intake manifold, fuel injectors, intake and exhaust valves and thoroughly clean the combustion chamber, in order to restore normal operation of the fuel system to ensure good driving performance of the car.