Automotive air conditioning system is mainly based fluoride as the medium through the system pressure transformation, to reach refrigeration purposes. It consists of the evaporation tank, an expansion valve, a compressor, a blower, a condenser, a drying tank and lines. Evaporation tank is working in air conditioning systems work properly in cold environments encountered relatively hot outside air will produce water, which is in the evaporation tank structure, design outlet truth; wet environment evaporation tank and ventilation ducts and dust on the surface provides a breeding ground for mold and fungus favorable conditions for mold and fungus will soon multiply to mold and fungus group group of organisms that produce rotting smell that smell will open with the air conditioning, mixed in the air which, contaminate the entire car interior, occupants often make people feel uncomfortable, but also people have severe dizziness, chest tightness and discomfort. Early use of OBD diagnostic tool that can identify and solve such problems in advance.
Auto repair industry in order to solve this problem, is often demolished evaporation tank cleaning surface evaporation tank in order to achieve this approach fundamentally eliminate the odor, but every once demolished, they need to put fluoride, fluorine and other installation and processing a series of processes, cumbersome and technical difficulty, and low labor productivity. Because evaporation tank often work in a wet environment, and humid environment can easily produce mold, just to clear the air conditioning mold, over a period of time may have odors occur.
In addition, the automotive air conditioning systems as well as common problems and slight leakage of fluorine refrigerant adverse phenomenon, which also adds a lot more difficult to repair, Launch X431 V+ Pro3 and Launch X431 IV GX4 Master automotive tools can be easily resolved.
Automotive air conditioning system, air conditioning piping in power fluoro circulating from the compressor, the compressor lubrication oil is accomplished by fluorine. In the pipeline, together with the fluorine fluorine oil circulation to the entire system, which directly affect the flow of circulating air conditioning cooling performance, fluorine and fluorine oil for a long time at high temperature and high pressure and low temperature and pressure in the changing environment, coupled with the compressor work long hours under wear metal debris, etc., will produce gum and other deposits, some of these sediments are filtered out, part of the precipitation in each pipe, a small amount of the deposit does not affect the air conditioning cooling performance, but the deposition increasing material will affect the circulation flow rate of fluorine, which affects the air conditioning cooling performance. Air conditioning maintenance, we exclude the circuit, mechanical, pressure, temperature (including engine temperature) and fluorine and other reasons, the air conditioning refrigeration is still bad, we can use Autel MaxiSys MS908 and Autel MaxiSys Mini MS905 tool, the problem would be easily solved .