Nano fuel additive is a functional material to make up for the defects of the fuel in some properties and to give some new properties of fuel. It has washing, dispersion, emulsion breaking, antioxidant, promoting burning, corrosion, rust, lubrication, cleaning function. According to Auto Diagnostic Tool tests show that nano-saving device is mounted on the pipe of the car, after the installation of this equipment can purify exhaust gas by 50% -90%, 10% -30% fuel savings, enhance the power of 10% -30%, reduce engine noise, suppression coke production, clean combustion and prolong engine life.

Nano fuel additives basic knowledge

Maintenance and good driving habits is the key to saving, The best fuel-efficient way is at ordinary times to use the Launch X431 PAD or Launch X431 GDS tools check vehicle, to develop good driving habits. Do not always emergency braking or hard acceleration. Energy-saving cars "four bogey." A bogey, since often require hard acceleration, braking, fuel consumption ratio will increase 2-3 times uniform; two bogey, pay attention to traffic conditions ahead, without prior dodge or slow down in advance, the car will see the red light or experience, rely on the emergency brakes, natural fuel soared; three bogey, high speed and low-speed operation, the engine idle for a long time; four bogey for a long time over economic speed driving.

Nano fuel additives basic knowledge

Nano fuel additives Product features: can effectively protect the engine, it can increase the useful life of an automobile engine and some 5 - 10 years, based on Autel MaxiSys Pro MS908P or Autel MaxiDas DS708 tool checks show can effectively fuel-efficient 5-16.6%, remove carbon deposition by more than 95%, the noise of the engine has also dropped. Nano fuel additive has a clean, dispersion, emulsion breaking and promote burning effect, after clear the carbon deposit in fuel oil, through the "microburst", promote burning, finally to reduce emissions, eliminate exhaust black smoke.